SL-130AN.C. door position detection outputPower Supply: DC12V

SL-130UDoor position detection and boltposition (N.C. & N.O.) output pointsPower Supply: DC12~24V

Please note that this electric lock has an oval cylinder and its width is 5.8cm. Therefore, the best position to install is at the center of the door leaf (not door frame). Please refer to installation diagram.

Product Parameter	Parameter Description
JINYINGModel	SL-130
Product Name	Dead Bolt Lock ( All purpose type )

JINYINGModel	SL-130A	SL-130B	SL-130U
Power Supply	DC12V/1A	DC12V/1A	DC12V	DC24V
Operation Current	880mA	880mA	900mA	450mA
Holding Current	250mA	250mA	250mA	120mA
Function	DC12V, N.C	DC12V, NC&NO	DC12V~24V, NC & NO
Signal Output	1. Fail-secure Type (Power to unlock). 2. Built-In Delayed Egress Control Point, and door will therefore lock automatically when door is not opened within 5 seconds.
Face Plate	Relock function will activate to lock the door automatically (maximum 60 times per session) when the door is not locked properly

 

Adjustable fail-safe (power to lock) or fail-secure (power to open).

Adjustable to fail-secure (power to open) for high security places. Adjustable to fail-safe (power to lock) for public places.

Built-in door open or door close state detection output point (250mA: N.C./ N.O.).

Suitable for 180° door.

Stainless steel bolt is able to sustain more than 800 kg of shear force.

Adjustable to fail-secure (power to open) to achieve long unlock state function.

Built-in oval cylinder as unlocking device. Use of oval cylinder to unlock when power cut occurred or during emergency.

Built-in photo couplers door open push button input contact. Door will lock again automatically when door is not open within 5 seconds.

Operation temperature: 0~90℃; Humidity: 85%Rh max.

Dimensions:

Body: 200mm(L) x 25mm(W) x 38mm(D)

Strike plate : 90mm(L) x 23mm(W) x 2.5mm(D)

Bolt : 16mm(Throw) x 12.7mm(Diameter)

Weight:750g

Certification: CE

?