SL-120UDoor position detection and boltposition (N.C. & N.O.) output pointsPower Supply: DC12~24VRelock function

※ Example：SL-120B has door position detection and bolt position (N.C. & N.O.) output points. Please note that this electric lock has an oval cylinder and its width is 5.8cm. Therefore, the best position to install is at the center of the door leaf (not door frame). Please refer to installation diagram.

Product Parameter	Parameter Description
JINYINGModel	SL-120
Product Name	Dead Bolt Lock ( power to open)

JINYINGModel	SL-120A	SL-120B	SL-120U
Power Supply	DC12V/1A	DC12V/1A	DC12V	DC24V
Operation Current	880mA	880mA	900mA	450mA
Holding Current	250mA	250mA	250mA	120mA
Function	DC12V, N.C	DC12V, NC&NO	DC12V~24V, NC & NO
Signal Output	1. Fail-secure Type (Power to unlock). 2. Built-In Delayed Egress Control Point, and door will therefore lock automatically when door is not opened within 5 seconds.
Face Plate	Relock function will activate to lock the door automatically (maximum 60 times per session) when the door is not locked properly

 

Fail-secure type (power to open) with MOV surge protection for higher security places.

Built-in door open or door close state detection output point (250mA: N.C./ N.O.).

Suitable for 180° door.

Stainless steel bolt is able to sustain more than 1200 kg of shear force.

Long unlock state function.

"Built-in oval cylinder as unlocking device. 

Use of oval cylinder to unlock when power cut occurred or during emergency."

"Built-in photo couplers door open push button input contact. 

Door will lock again automatically  when door is not open within 5 seconds."

Operation temperature：0~90℃ ; Humidity：85%Rh max.

Dimensions：

Body：200 L) x 32(W) x 46(D) (mm)

Strike plate：90(L) x 26(W) x 2.5(D) (mm)

Bolt：17(Throw) x 15.5(Diameter) (mm)

Weight：1100g

Certification：CE

?