Question | What is an Automatic Door Operators? | |
JINYINGAnswer | JINYINGSwing-Door Operator or Swing-door Opener or Automatic Swing-Door Operator or Swing Gate Operator is a device that operates a swing door for pedestrian use. It opens or helps open the door automatically,waits,then closes it. Automated swing doors are suitable for both indoor and outdoor doors. They can be designed with or without a threshold and can meet a number of requirements. They make excellent emergency doors – with break-out features and smoke and fire control features and they can have anti-burglary protection for added security. |
Question | What is a swing door? | |
JINYINGAnswer | Most doors are swing doors – just think of your home, the doors to your bedroom, bathroom and kitchen are all, most probably, swing doors. Any entrance with two hinges that opens either inwards or outwards is a swing door. Swing doors are always framed, but can be made from a variety of different materials, from wood to aluminum to plastic to glass | |
Question | How does a swing door work? | |
JINYINGAnswer | Swinging doors, also commonly known as hinged doors, operate by turning on hinges installed on a side jamb. When pulled or pushed, a swing door pivots around the jamb and the threshold. ... Swinging doors, also commonly known as hinged doors, operate by turning on hinges installed on a side jamb. | |
Question | What items does ED100 include? | |
JINYINGAnswer | An Swing Operator with arm(choose push or pull),2 pcs remote controller,2pcs of microwave sensor and screws | |
Picture | ||
Question | How much holding force does it support? | |
JINYINGAnswer | 80-100kg is most ideal,200KG is max | |
Question | Could we set time delay on ED100 Swing Operator? | |
JINYINGAnswer | yes,we can set 1-30seconds. | |
Question | could we change the push arm and pull arm by ourselves? | |
JINYINGAnswer | yes,if you are not sure right now,you can buy extra pull or push arm and changing by yourself in case. | |
Question | Could we connect magnetic lock,strike lock or dropbolt lock etc to ED100 Door Operator? | |
JINYINGAnswer | Yes,we can connect any locks,no matter NC or NO types | |
Question | What kind of door EB100 is suitable for? | |
JINYINGAnswer | PULL-arm mounting | PUSH-arm mounting |
Suitable for Door wing opening Inward ( Driver system inside ) | Suitable for Door wing opening Outward ( Driver system inside ) | |
Installation Mode | ||
Question | What is the door width suitable? | |
JINYINGAnswer | 1 ~ 1.2 meters is best,max is 2meters for single door | |
Question | What is the weight for each ED100 kit? | |
JINYINGAnswer | Standard package is 2 pcs/CTS, Weight is 15.5KG, Package Dimension: 65*30*20cmUnit price is 8KG | |
Question | Does the shipment include battery? | |
JINYINGAnswer | Yes,the remote control build-in battery,but we can take out if shipment has extra charge. | |
Question | Could we just buy the operator?no need the sensor and remote? | |
JINYINGAnswer | Yes,in this case,price is cheaper 18USD.thus 130USD | |
Question | Could we use on glass door? | |
JINYINGAnswer | Yes,you will need to advise us to configure UB-600 u bracket for you before placing order | |
Question | Power supply is 200V-240V,but i use 110V-120V | |
JINYINGAnswer | Factory default support 220V, also can customized 110V without extra charge | |
Question | Where shall I install micro-wave sensor | |
JINYINGAnswer | We suggest installing on the top of of the door or on the ceiling. | |
Question | How many micro-wave sensor shall we used? | |
JINYINGAnswer | Normally 1 enough,but you can also install 2pcs,outdoors and indoors. | |
Question | Can this be integrated/connected to existing electric locks (mag locks. bolt locks etc)? | |
JINYINGAnswer | Yes, it compatible with JINYINGAccess Control Systems and accessories | |
Wiring Diagram |