| Product Parameter | Parameter Description |
| JINYINGModel | ACB-07 |
| Product Name | RS232 Converter into RS485 Output |
| BASIC INFO | |
| Unit Size | 108*88*23mm |
| Unit Packing Way | BOX |
| Accessories | User Manual, warranty card |
| FEATURES | |
| General Introduction | RS232-RS485 Converter is the RS-232 RS-485 serial signal inter-conveersion, differential half-duples. network-based active converter between RS-232 and RS-485, This product has features of a strong drive capability, simpleandpratical interface, anti-lightning, anti-surge, anti-staic, stable design and perfrommance, beautiful appearance and so on. It comes with power indicator and data traffic lights to direct communication fault conditions, It'sa cost-effective and good perfrmance data interface conversion item. |
| Improtant features | Jumper-free DIP switch setting, adaptive connections, simple wire conecting, direct and clear commuication situation feedback, easy installation, maintenance and troubleshooting Three-level intemational standards for lightning protection design, lightning hit 50 consecutive 5000V is not bad, and it's safe and secure with realtive level index of anti-static and anti-surge indicators. |
| Purpose | Increase the transission distance between the controllerandcompute, If232 communication generally support transmission diatance within 20m, it will support over 1000m with use of 485P convertor. |
| Notes | 485+ and 485- the two must be mutually twisted-pair cable, you can use one pair of the four pairs cable, 485 must be hand in hand, bus-type structre that is resolutely forbidden star connection and branching connctions, |
| communication distance | ≤1200m (proposed within 800m) |
| load capacity | ≤256 unit (proposed 100 units or less) |
| Baud rate | 110-38400 bps adaptive |
| Standard | EIA RS-232, RS-485 standard |
| Input power | DC9V≥300mA |
| Operating temperature | -40°C ~ 70°C |
?
Tags :
English
繁體中文字幕
english
繁體中文翻譯
82221217
82221217@qq.com
