Power supply: +9~24V, 30mA;

Default support WG26~WG80,

 (including WG26/32/34/35/36/37/40/42/44/66/80 and keyboard code input);

The swipe interval of each card reader > 150ms;

Two-way WG signal input and output through 485 interface (optional customization);

RS485 communication parameters: 9600, n81;

-------------------------------------------------------------------------------

2 in 1 out

Connect 2 card readers, support WG26 ~ WG80 and keyboard code.The swipe information is output in turn in WG3. In practice,the 4-door one-way access control motherboard can be turned into 4-door two-way swipe to open the door.In the case of card reader, the card number of reader 1 is output first, and then the card number of reader 2 is output;

-------------------------------------------------------------------------------

1 in 2 out

A card reader is connected to two access control boards via the adapter board,

and the card number is output to the access control board 1 and the access control board 2 at the same time.The card number forwarding rules can be customized according to user requirements; 

-------------------------------------------------------------------------------

4 in 1 out

 Access to 4 card readers can be swiped at the same time.The access card readers 1, 2, 3, and 4 swipe information are sequentially output from the adapter board 3 to the access control board.In actual use, it can be extended for access control system reader access Convenient for a large number of peopleto swipe the card at the same time; 

?